|  Market Overview

Europe, lacking ample indigenous energy resources, heavily relies on importing energy from other regions, driving up the cost of energy supply. Consequently, European countries lean towards electricity as their primary energy source. However, these nations also face pressure from environmental policies in electricity production and supply. The maintenance and operational costs of cables, transformers, and transmission lines are relatively high, further inflating residential electricity bills. Hence, European countries adopt time-of-use electricity pricing policies, resulting in significantly higher electricity prices during peak hours compared to off-peak hours. Heat exchanger tank can convert electricity into thermal energy during low-demand periods, effectively reducing electricity consumption during peak hours.

|  Market Pain Points

In a heat exchanger tank,how does the hot water at the bottom mix with the cold water in the upper part of the tank at the required time and rate to achieve a steady supply of warm water in the home? How to minimize the noise of the heat exchanger tank when it is in operation so that it does not affect the sleep of the family members, as the lowest electricity prices are usually between midnight and 6am? In some countries, the water pressure in the pipeline can reach 6-7 bar, how to ensure that the hot water system of the heat exchanger tank continues to operate stably? The water pump of the heat exchanger tank already has a fixed installation connection, how to replace the water pump?

|  TOPSFLO Solutions

TOPSFLO TL-C04-D DC circulation pump, according to the above special needs of the heat exchanger tank, the pump is customized and provides the following solutions:

1. TL-C04-D is customized to the parameters of 23L/min, 4m according to the flow demand point of the heat exchanger tank, and increase the PWM intelligent speed regulation, so that the hot and cold water in the heat exchanger tank can be mixed at the specified time and speed, to ensure the continuous supply of warm water according to the user’s demand.

2. The lowest electricity price is usually in the early morning to 6 a.m., so the heat exchanger tank will continue to work during the user’s sleep section, TOPSFLO TL-C04-D through the use of larger parameter pump to reduce the speed, and the use of a patented silent rotor, the noise is as low as 38dB, to ensure that it does not affect the user’s sleep.

3. There are differences in pipeline water pressure in various European countries, ranging from 5-8bar. The TL-C04-D water pump is made of high-pressure PPE material imported from Japan, which can withstand a long-term pressure of 10bar and a maximum pressure of 18bar. It meets the different water pressure requirements of various countries.

4. Many heat exchanger tank and pumps docking end of the metal G1/2 external threads, TOPSFLO TL-C04-D for the customized G1/2 internal threads can be a perfect match for the docking pipeline. And it can 100% replace Laing D5.

Heat exchanger tank application diagram